Tray and bath edges
The lower joint needs careful preparation and a clean seal.
A clean shower surround
Give your shower a broad, waterproof finish with fewer lines and less grout to clean.

Panels, showers and storage
Save the finishes and fittings you like, then discuss what will fit your room.






Products and fitting work
Shower wall panels can cover the walls around a shower tray, over-bath shower or walk-in area. Good fitting protects the edges, corners and openings around controls.
The panel layout should avoid awkward slivers at corners and leave planned openings around shower controls and pipework.
Matching or contrasting strips finish the panel edges. Some joint systems create a nearly continuous finish when the pattern is planned across the wall.
The lower joint needs careful preparation and a clean seal.
Openings should be neat, supported and sealed as required.
Stone and marble effects look better when the panels are set out as a whole wall.
Bathroom services

Create an open shower area that feels easy to enter, wipe down and use every day.
Explore
Create a smooth bathroom finish with fewer joints to scrub and a wide choice of looks.
Explore
Plan the bath edge, taps, shower screen and wall joints together for a cleaner finish.
ExploreBefore your bathroom visit
The panel face is designed for wet areas. The final result also depends on proper wall preparation, the correct trims and carefully sealed joints.
Yes. Wet wall panels are often used around baths, shower trays and walk-in showers. The layout should be measured before any panel is cut.
Many people find them easier to wipe because there are fewer joints and fewer grout joints. Follow the panel manufacturer’s cleaning instructions.
Yes. Popular choices include marble, stone, concrete, tile and wood effects. Samples help you judge the colour in your own light.
Send your postcode and a short note about the room. A home visit can then confirm measurements, preparation and the finish you want.
Start with your room